Kawasaki Motorcycle Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 · (Edited)
My grips are slipping. It looks like the last owner glued them on. I'm going to reglue with silicone, but not a perfect solution.

I measured the diameter of the bars, it looks like 1 1/8. I measured the circumference, 3.5 inches. Google says that is a diameter of 1.11 inches (a touch under 1 1/8).

I have looked at replacement grips, they seem to only come in 1 inch and 1.25 inch. Which do I choose?

I appreciate the help.

Hood Automotive tire Motor vehicle Automotive lighting Automotive design
1 - 1 of 1 Posts