Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
692 Posts
Discussion Starter · #1 ·
Im new to the site but not new to riding.. I did have a question about the exhaust valve on the 06 zx-6r, I was wondering if it was possible to remove that shit while keeping stock exhaust??
 

·
Registered
Joined
·
562 Posts
Not to my knowlegde, if you look at it, it is welled at the end of the midpipe. Even if you bypass it w/ the factory exhaust or get an aftermarket exhaust you will get a FI light on your cluster. Check the boards here you will find alot of info about that subject.

WELCOME... happy riding... keep that front wheel down...

--Anthony
 

·
Registered
Joined
·
230 Posts
Howdy! Welcome to the site :D You'll find all kinds of good info on here! personally, i wouldn't mess w/ it... too good the way it is!

Keep the shiny side up
 

·
Registered
Joined
·
533 Posts
[:Welcome] You don't have to remove the valve.

http://www.motorcycle-usa.com/Article_Page.aspx?ArticleID=3439&Page=1
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top