Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 13 of 13 Posts

·
Registered
Joined
·
394 Posts
Discussion Starter #1
Hi

I measured the ear wheel nut and the tripple tree clamp nut and this is what I came up with. Can someone that know please confirm this before I go out and buy the sockets....

wheel - 30mm
trip clamp - 35mm

Regards
 

·
Registered
Joined
·
394 Posts
Discussion Starter #3
ok, then I measured like my ass apparently....thanks, can anyone else confirm?
 

·
Registered
Joined
·
394 Posts
Discussion Starter #5
Spankyou ... throws away the 30mm socket he bought yesterday for R43.00!
 

·
Registered
Joined
·
1,436 Posts
Yeppers, 32mm on the axle nut and 36mm on the stem nut. The tool kit has a tool for the rear axle nut if you need one right away.
 

·
Registered
Joined
·
394 Posts
Discussion Starter #7
Really? Jees,ok, thanks!

Do you guys also carry the appropriate torque settings around in your wallets for these two nuts?
 

·
Registered
Joined
·
136 Posts
According to the 2005 zx6r service manual, The rear axle nut torque should be 94 ft-lb. Steering stem head nut at 58 ft-lb.
 

·
Registered
Joined
·
394 Posts
Discussion Starter #9
thanks, how does that translate to newton metres of torque?
 

·
Registered
Joined
·
136 Posts
Originally posted by Obiwan
According to the 2005 zx6r service manual, The rear axle nut torque should be 94 ft-lb. Steering stem head nut at 58 ft-lb.
Rear axle nut 127 N-m
Steering stemp head nut 78 N-m
 

·
Registered
Joined
·
394 Posts
Discussion Starter #11
Spank you James!
 

·
Registered
Joined
·
394 Posts
Discussion Starter #13
Personal Joke with myself....:D
 
1 - 13 of 13 Posts
Status
Not open for further replies.
Top