Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
303 Posts
Discussion Starter #1
I just converted my turn signals into my tail lights... I used a starndard trailer converter just as many of you have... When the brake is applied the turn signals blink fast.... I have seen in a different post that i should get a heavy duty relay.... but i can't not figure out how to wire the relay... It is just a standard relay... It is rather frustrating... I would greatly appreciate the help... a diagram would be nice.. thanks in advance

2001 Yellow ZX-6R
 

·
Registered
Joined
·
1,606 Posts
It is an easy fix. You need a solid state flasher. You can get one at Autozone or similar. Look behind the battery and ahead of the rear fender. It is a square looking plug-in relay with two terminals. Unplug it and check your turn signals. If they don't flash you have the right one. Take it with you to match the terminal at the parts store.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top