Kawasaki Motorcycle Forums banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
231 Posts
Discussion Starter #1
has anyone put a zx10 motor in a 636. Any info or help would be appreciated. I know it sounds like a dumb plan but i thought i might ask if its not that hard.
 

·
Registered
Joined
·
44 Posts
just sell your 636 and get a zx-10r... easiest way, less costly and no trouble with the law/insurance cause of the swap and serial numbers.
 

·
Registered
Joined
·
1,354 Posts
It does not fit. With enough money you could make it fit. Neither the frame nor the swingarm are stiff enough to handle the torque. If you want to go faster go to some track days.
 

·
Registered
Joined
·
231 Posts
Discussion Starter #5
i was just gonna do it as a novelty. I put a Busa motor in a 02' gixxer 1000 and it came out really nice (a little fat though). so i thought i might try the 636 too. Thanks for the reply's though
 

·
Registered
Joined
·
165 Posts
ya you should and then sell me your 636 motor
 

·
Registered
Joined
·
1,367 Posts
Originally posted by Ernie
It does not fit. With enough money you could make it fit. Neither the frame nor the swingarm are stiff enough to handle the torque. If you want to go faster go to some track days.
[:Agree]
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top