Hi working on a freinds bike the Fi light is constantly on but the bike runs fine, tried to locate the diagnostic wire to ground it to try get the light to flash up a code but i cannot find it if anyone has a similar bike would the be able to let me know an alternative option or if they know where there wire is trace it back and maybe send some photos incase its trapped under the fuel tank or hidden, cheer TIA
viper 1
Ok, Not a big issue, Trace that single Diag wire back to the ECU on the wiring diagram in the manual and pin the wire where it goes into the ECU to ground the same way you would if you'd found that pig tail under the seat.
First Image the Yellow Pig Tail single Diag wire from that Multi Connector comes out the back as Yellow/Black
Second Image is that Yellow/Black wire back to the ECU, Make sure you pin the correct Ground wire so check you have a Green wire one side and Black/White the other side of the Yellow/Balck
![Image]()
![Image]()
First Image the Yellow Pig Tail single Diag wire from that Multi Connector comes out the back as Yellow/Black
Second Image is that Yellow/Black wire back to the ECU, Make sure you pin the correct Ground wire so check you have a Green wire one side and Black/White the other side of the Yellow/Balck
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
