Kawasaki Motorcycle Forums banner

Ninja 650 Tail Tidy question.

8K views 5 replies 4 participants last post by  gtibrett  
#1 ·
On the 650 shop, there is an undertail kit under the bodywork section, and a section devoted to undertail's. Is the tail tidy under the bodywork section meant to be purchased AFTER you already get the fender elim, or is it just another type of fender elim? Thanks.
 
#4 ·
Dunno what plate sizes are like other places, but my Virginia (USA) plate bolted right up to the bolt locations for the fender.

So, I basically took the entire fender off including indicators. Bolted my plate right to the tail of the bike. Installed a taillight with integrated indicators. no mess. no parts to buy to "eliminate"

Also, I assume it is legal until someone with a badge tells me otherwise.
 

Attachments

#5 ·
Dunno what plate sizes are like other places, but my Virginia (USA) plate bolted right up to the bolt locations for the fender.

So, I basically took the entire fender off including indicators. Bolted my plate right to the tail of the bike. Installed a taillight with integrated indicators. no mess. no parts to buy to "eliminate"

Also, I assume it is legal until someone with a badge tells me otherwise.
hey man where did you get those front fairings?
i have an 06 ninja 650 is there a similar kit?
thanks
 
#2 · (Edited)
Its another type of fender eliminator. Basically you remove that ridiculous fender, disconnect the signal lights and license plate from it, bolt on the tail tidy, and reattach the stock turn signals. The R&G tail tidy includes a license plate lamp. Installation is pretty quick. It all depends on if you like the look of the stock turn signals. I don't have a rear shot of the tail tidy, but you get the idea from the attached side picture.
 

Attachments

#3 ·
Its another type of fender eliminator. Basically you remove that ridiculous fender, disconnect the signal lights and license plate from it, bolt on the tail tidy, and reattach the stock turn signals. The R&G tail tidy includes a license plate lamp. Installation is pretty quick. It all depends on if you like the look of the stock turn signals. I don't have a rear shot if the tail tidy, but you get the idea from the attached side picture.
Thanks man. I think I'm going to go with the fen elim under the bodywork section. The Ermax undertail. I like the blinker setup. Not really a fan of the stock blinkers on an eliminator. We'll see. Thanks for the info. Didn't want to buy 2 of the same thing. lol.